Utilizăm cookies pentru ca dumneavostră să aveți o experiență cât mai plăcută. Pentru a ne conforma noii directive e-Privacy, trebuie să primim acordul dumneavosatră pentru a seta cookie-urile. Află mai multe.
TBB-SIES 8060S-60x2
Numai 0 rămase
Cod Produs
LPI00711
| [SIES] Configuration | |
| Model of Energier Pro | Eneriger Pro CF8060S, 48V/60A, 8,000VA |
| Model of Charge Controller (MPPT) | 2 x SolarMate SP60-150, 60A/150Voc |
| Model of SmartBox | SIES-80S60x2 |
| max. PV size | 7.68 KW |
| Recommended Battery Capacity | 30.4 KWh |
| [SIES] System specification | |
| Nominal DC voltage | 48 Vdc |
| Inverter / Battery Charger | 48V / 60A, 8,000VA |
| Charge Controller (MPPT) | 60A / 150Voc x 2 |
| Central Monitor | Cyber |
| System Logic (configurable) | Solar Hybrid / Solar Energy Storage / Solar Backup |
| Communication | Built-in Bluetooth, Optional GPRS or WIFI |
| [SIES] Energy Measurement | |
| AC Input | Voltage, Frequency, Current, Power, Energy |
| AC Output | Voltage, Frequency, Current, Power, Energy |
| Battery Parameter | Voltage, Charging Current, Discharging Current, Power, Time to Go, State of Charge (SoC) |
| Solar | PV voltage, Current, PV harvest KWh |
| [SIES] AC Input | |
| Pre-installed MCB | 2-polig 63A |
| Pre-installed SPD | Uc: 385Vac, In: 20 KA (8/20 us), Imax: 40KA (8/20 us) |
| Twin AC Input | optional |
| Automatic Generator Start (AGS) | Built-in, Support 2-Wire and 3-Wire generator, max. 8A / 30Vdc, 1.5 mm2, PA66 / V0, M3 screws |
| Terminal | Cables between SmartBox and Energier Pro |
| Cable | Cables between SmartBox and Energier Pro |
| [SIES] AC Ouput | |
| Pre-installed RCD (Residual Current Device) | 1P+N40A / 30mA / 4.5 KA |
| Pre-installed Maintenance Bypass RCD (Residual Current Device) | 1P+N40A / 30mA / 4.5 KA |
| Programmable Output | 2-way 16 Amps (max.), Based on Time, SoC of Power Limit |
| [SIES] DC Input | |
| Pre-installed Battery MCB | 250A / 60VDC (2-pole 125A) |
| Terminal | Copper BUS bar with 2 x M8 screws |
| Cable | Cables between SmartBox and Energier Pro, SolarMate (MPPT) |
| [SIES] Solar Input | |
| Pre-installed PV MCB | 63A / 250 Vdc x 2 |
| Terminal | 100A / 800V, 16mm2, PA66/V0 M4 screw |
| Cable | Cables between SmartBox and SolarMate (MPPT) |
| [SIES] Mechanical Data | |
| Enclosure | Steel with power paint |
| Protection Category | IP20 |
| Dimensions (mm) | |
| Weight (kg) | |
| [SIES] Standard | |
| Safety | EN62109-1, EN62109-2 |
| EMC | EN61000-3-2, EN61000-3-3, EN61000-6-1, EN61000-6-3 |
| Greutate (kg) | 70.0000 |
|---|---|
| Producator | TBB Power |
| Datasheet | http://catalog.ecovolt.ro/pdf/invertor/TBB Brochure-SIES Self consumption Hybrid Solar System-V3.0-20180130.pdf |
| Inaltime (mm) | 160 |
| Latime (mm) | 700 |
| Lungime (mm) | 1077 |
| Forma unda | Sinus pur |
| Putere Invertor | 8000 |
| Tensiune intrare invertor | 48 |
| Redresor incorporat | DA |
| Clasa protectie | IP 20 |
| Consum Standby | 30 |
| Comunicatie | Ethernet |
| Tip invertor | Off-grid |
Scrie o recenzie